CWG-500tH
Lightweight and compact design is ideal for easy installation.
Electromagnetic spring-applied brake.
Planetary gearbox for maximum mechanical efficiency.
Cast steel foot mounts.
Heavy-duty ball bearings on all running surfaces
Closed drum flanges to prevent rope from being pinched between drum and support castings
24 vac low voltage control is standard
Rated load limiter limits motor drive power to prevent winch overloading
Specifications
-
load capacity: 500 kg with wire rope deck position
-
Hoisting speed: 19 - 34 m/min
-
Power source: 3 phases, 380-440 V
-
Motor power IP54: 3.7 kW x 2-pole induction brake motor
-
Maximum lifting height: 127 m
-
Braking methods: Electromagnetic spring-applied brake with safety function
-
Wire rope: 8 mm x 130 m, 6 x 19, with 2,970 breaking load
-
drum length: 300 mm
-
drum diameter: 114.3 mm
-
Drum flange diameter: 240 mm
-
Fastening screw pattern: 460 mm x 300 mm
-
Net weight, kg (standard version): 155 kg
-
Gross weight: 183 kg
-
Housing dimensions (l x d x H): 1.002 x 424 x 360 mm
-
Carton dimensions (l x d x H): 1.140 x 590 x 520 mm
Meets the requirements of en 14492-1:
* For lifting applications:
The working coefficient for the first layer of rope on the drum must be at least 5.
The D/d ratio to the center of the rope must be at least 15 for the drum.
A switch with emergency stop and limit switch functions is required
* For pulling application:
The working coefficient for the first layer of rope on the drum must be at least 3.
The D/d ratio to the rope center must be at least 12 for the drum.
A switch with emergency stop and limit switch functions is required
Lifting force, lifting speed and rope capacity:
| Rope layer |
lifting capacity, kg |
Lifting speed, m/min at 50 Hz |
Total rope on drum, m |
| 1. |
893 |
19 |
14 |
| 2. |
789 |
22 |
30 |
| 3. |
707 |
24 |
48 |
| 4. |
641 |
27 |
67 |
| 5. |
586 |
29 |
89 |
| 6. |
540 |
32 |
112 |
| 7. |
500 |
34 |
130 |
Notice:
1. All ratings are based on the top layer. For each layer reduction on the drum, the tensile force is increased by 10 %.
2. Use a pulley for double line operation to increase tensile capacity by approximately 85%.
3. Tensile capacities are based on a tensile load with 15% allowed for friction (specific applications may vary)
Warning:
The winch is not intended to be used in any way to move or lift people.
The rated capacity listed is based on the top layer of rope on the drum.
The rope wrap on the drum must remain 5 turns away from the drum.
Warranty:
Each new winch is warranted against defects in workmanship and materials for twelve months from the date of purchase.
DRAHt Rope are NOT included in the WARRANtY.
| Scope of delivery |
Optional accessories |
|
Wire rope 8 mm x 130 with safety latch hooks
- Remote control, cpb-161
- Switch cable 1.25 mm 2 x 3c x 3 m
- Pendant switch cpb-161
- Low voltage control, LV-320
- Base plate
|
- Remote control, PB-306 assembly (switch with emergency stop button)
|
